A supplier that claims to do everything is a supplier a buyer cannot plan around. The matrix below states the material range, size range, pressure, temperature, standard, and lead time for each product family — and the cases we review individually rather than accept by default.
Check Your Specification →| Product family | Material range | Size range | Pressure | Temperature | Standard | Lead time |
|---|---|---|---|---|---|---|
| Spiral Wound Gaskets | SS304/316/316L, Monel, Inconel + graphite / PTFE / ceramic / mica filler | Up to 3000 mm OD | Per ASME B16.20 | -200 to +650 °C | ASME B16.20, API 601 | 15–30 days |
| Ring Joint Gaskets | Soft iron, SS, Monel, Inconel | R / RX / BX series | Up to 3000 bar | Per material | API 6A, ASME B16.20 | 15–30 days |
| Kammprofile / Jacket / Corrugated | Graphite, PTFE, mica, non-asbestos + metal core or jacket | Up to 3000 mm | Per construction | -200 to +650 °C | DIN, BS, JIS | 15–30 days |
| Braided Packing | PTFE, graphite, aramid, carbon fiber, mineral fiber | 3–50 mm section | Per construction | -200 to +1050 °C | API 622 | 15–30 days |
| Compression Sheets | Graphite, PTFE, rubber, cork, mica, non-asbestos | 0.5–6 mm thickness | Per material | -200 to +650 °C | ASTM F104 | 15–30 days |
| PTFE & PEEK Seals | Virgin PTFE, modified PTFE, PEEK | To drawing | Per design | -200 to +260 °C | FDA, RoHS | 15–30 days |
| Sealing Machines | SWG winding, cutting, Kammprofile, double jacket, graphite, braiding, testing | Per model | — | — | CE where applicable | Per model |
Gasket OD above 3000 mm, pressure ratings outside ASME B16.20 or API 601 scope, packing for shaft speeds above the published limit, and PTFE parts requiring wall thickness below 1 mm are reviewed case by case before a quote is issued. If a specification falls outside the standard range, the engineering team says so on the quote rather than accepting the order and discovering the constraint in production.
